Microprocessor-based step/profile PID temperature controller

PID temperature controller, for panel and machine/control panel mounting, relay outputs, measuring range -100°C ... +1750°C, resolution / step 0.1ºC, 20 temperature steps / heating steps (made in Turkey, TENSE)

As can be seen from the graphs above, unlike inexpensive analogues, the TENSE thermostat allows you to set temperature limit values and the time it takes for the temperature to reach the set limit values. This significantly simplifies the programming process. In addition, the PID mode allows you to keep the system temperature as close as possible to the set points.

An important difference compared to competitors is also the simultaneous display of current temperature, set temperature, set step and time. The presence of START/STOP/PAUSE/SET controls on the front panel is very convenient - this ensures quick and efficient control of your processes.

Temperature control is carried out by ON/OFF or PID control. The controller offers self-optimization, which prevents overshooting of process values.

• Automatic tuning of PID parameters

• Setting up to 20 temperature/heating steps

• Each stage is programmed for up to 18 hours

• Sensor type: T/C (J,K,T,S,R), Pt100
• Selectable control type: P, PI, PD, PID or ON-OFF

• Automatic "overshoot" removal in PID mode

• Anti-windup

• Delay for OUT cooling mode activation

• Password protection

• EEPROM memory for saving settings

• OUT relay outputs (NO+NC) 250VAC, 2A

The measurement range depends on the sensor and can be set using the buttons on the temperature controller.

Please do not forget to order our temperature sensors - thermocouple type J Fe-Const (metric 6/8) with a temperature measuring scale: -100 °C - +600 °C. Can be with 1 m, 1.5 m, 2 m, 2.5 m, 3 m, 4 m and 5 m long cable.